CHEMISEPT WIPES MD alcohol-based wipes for emergency disinfection, 100 pcs.

CHEMISEPT WIPES MD alcohol-based wipes for emergency disinfection

WARNING: THIS IS A BIOCIDAL PRODUCT.
Use biocidal products safely.
Always read the product label and product information before use.

Chemisept Wipes MD are ethanol-based wipes suitable for the rapid disinfection of all alcohol-resistant surfaces. This product is particularly
Useful when high hygiene requirements are imposed and it is important to constantly quickly disinfect the surface.
Chemisept Wipes MD effectively kills many bacteria, as well as mycobacteria (including Mycobacterium avium and Mycobacterium terrae), many viruses (including all enveloped viruses, rotaviruses, adenoviruses, noroviruses), fungi and yeasts.

AREAS OF USE: Alcohol-based wipes for rapid disinfection of medical devices and other alcohol-resistant surfaces where short contact times are required, for example in the following areas:

• hospitals and other medical institutions;
• operating rooms and procedure rooms;
• intensive care units;
• accident and emergency departments;
• dialysis units;
• family doctors' offices, first aid stations;
• ambulances;
• laboratory and diagnostic facilities;
• dental offices;
• home care;
• food industry and food production sites;
• pharmaceutical and cosmetic industry;
• food industry.

USE: Chemisept Wipes MD are ready to use. Open the lid of the box and pull out the impregnated wipe up to the perforated area. Tear off the wipe by pulling sharply at a narrow angle. After tearing off the wipe, close the lid immediately to prevent the wipes from drying out. Clean the surface thoroughly with the impregnated wipe, making sure to wet it completely. The surface must appear wet for 30 seconds for the disinfection to be effective. The surface does not need to be rinsed. Indicate the date of first use on the product packaging.

If you are unsure whether the surface is resistant, test the product on a small area first.
inconspicuous areas. This product is not suitable for acrylic glass, Plexiglas and alcohol
not resistant to varnish.

PRODUCT COMPOSITION:
100 g of the product contains the following active ingredients: 72 g of ethanol.
pH 6.5–7.5

Hazard phrases:
Flam. Liq. 2: H225 - Highly flammable liquid and vapour.

Precautionary phrases:
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233: Keep container tightly closed.
P403+P235: Store in a well-ventilated place. Store in a cool place.
P501: Dispose of contents/container in accordance with hazardous waste or packaging regulations.

Signal word: Danger

PRECAUTIONS

• Highly flammable liquid and vapor.
• Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames or other ignition sources. No smoking.
• Keep container tightly closed. Wear protective gloves.
• Store in a well-ventilated place. Store in a cool place.
• Dispose of contents/container in accordance with applicable hazardous waste or packaging regulations.
• and packaging waste management requirements.

Product documents are valid until 2030-08-05:
Product description + safety data sheet + biocide certificate